Radon

Radon

Matrix: DW/NP 
NP Method: SM 7500-Rn B

Sample Requirements

Bottle

Glass Vial 40 mL (ZHE)5 (2)

Min. Volume (mL)3:

80

Preservation:

Cool to < 6°C

Holding Time:

3 Days

Notes

01. Abbreviations
DW = Drinking Water
NP = Non Potable (includes wastewater, surface water, etc.)
HW = Hazardous Waste

02. Sample lists typical bottle provided by Ana-Lab.

03. The minimum volume does not allow for re-runs or QC specific (Duplicate, MS, MSD) analysis.

04. Three glass quarts (amber for organics) are required for MS/MSD analysis.

05. Three vials are required for MS/MSD analysis.

06. Bottle obtained from subcontractor.

07. 100g required for TCLP metals only. Complete TCLP may require up to 1500g.

08. Soil Samples require a 5035 Kit in most cases.

Preservatives

C₆H₈O₆ – Ascorbic Acid
EDA – Ethylenediamine
EDTA – N,N’-1,2-Ethane dilybis-(N-(carboxymethyl)glycine)
HCl – Hydrochloric Acid
HNO₃ – Nitric Acid
H₂SO₄​ – Sulfuric Acid
Na₂S₂O₃​ – Sodium Thiosulfate
Na₂SO₃ – Sodium Sulfite
NaHSO₄ – Sodium Bisulfate
NaOH – Sodium Hydroxide
NH₄Cl – Ammonium Chloride
ZnC₄H₆O₄ – Zinc Acetate

Radium 228

Radium 228

Matrix: DW/NP 
NP Method: SM 7500-Ra D / EPA 904

Sample Requirements

Bottle

Polyethylene 500 mL (2)

Min. Volume (mL)3:

1000

Preservation:

HNO3 to pH <2, Cool to < 6°C

Holding Time:

180 Days

Notes

01. Abbreviations
DW = Drinking Water
NP = Non Potable (includes wastewater, surface water, etc.)
HW = Hazardous Waste

02. Sample lists typical bottle provided by Ana-Lab.

03. The minimum volume does not allow for re-runs or QC specific (Duplicate, MS, MSD) analysis.

04. Three glass quarts (amber for organics) are required for MS/MSD analysis.

05. Three vials are required for MS/MSD analysis.

06. Bottle obtained from subcontractor.

07. 100g required for TCLP metals only. Complete TCLP may require up to 1500g.

08. Soil Samples require a 5035 Kit in most cases.

Preservatives

C₆H₈O₆ – Ascorbic Acid
EDA – Ethylenediamine
EDTA – N,N’-1,2-Ethane dilybis-(N-(carboxymethyl)glycine)
HCl – Hydrochloric Acid
HNO₃ – Nitric Acid
H₂SO₄​ – Sulfuric Acid
Na₂S₂O₃​ – Sodium Thiosulfate
Na₂SO₃ – Sodium Sulfite
NaHSO₄ – Sodium Bisulfate
NaOH – Sodium Hydroxide
NH₄Cl – Ammonium Chloride
ZnC₄H₆O₄ – Zinc Acetate

Radium 226

Radium 226

Matrix: DW/NP 
NP Method: SM 7500-Ra B

Sample Requirements

Bottle

Polyethylene 500 mL (2)

Min. Volume (mL)3:

1000

Preservation:

HNO3 to pH <2, Cool to < 6°C

Holding Time:

180 Days

Notes

01. Abbreviations
DW = Drinking Water
NP = Non Potable (includes wastewater, surface water, etc.)
HW = Hazardous Waste

02. Sample lists typical bottle provided by Ana-Lab.

03. The minimum volume does not allow for re-runs or QC specific (Duplicate, MS, MSD) analysis.

04. Three glass quarts (amber for organics) are required for MS/MSD analysis.

05. Three vials are required for MS/MSD analysis.

06. Bottle obtained from subcontractor.

07. 100g required for TCLP metals only. Complete TCLP may require up to 1500g.

08. Soil Samples require a 5035 Kit in most cases.

Preservatives

C₆H₈O₆ – Ascorbic Acid
EDA – Ethylenediamine
EDTA – N,N’-1,2-Ethane dilybis-(N-(carboxymethyl)glycine)
HCl – Hydrochloric Acid
HNO₃ – Nitric Acid
H₂SO₄​ – Sulfuric Acid
Na₂S₂O₃​ – Sodium Thiosulfate
Na₂SO₃ – Sodium Sulfite
NaHSO₄ – Sodium Bisulfate
NaOH – Sodium Hydroxide
NH₄Cl – Ammonium Chloride
ZnC₄H₆O₄ – Zinc Acetate

Gross Beta

Gross Beta

Matrix: DW/NP 
NP Method: SM 7110 B / EPA 900

Sample Requirements

Bottle

Polyethylene 500 mL (2)

Min. Volume (mL)3:

1000

Preservation:

HNO3 to pH <2, Cool to < 6°C

Holding Time:

180 Days

Notes

01. Abbreviations
DW = Drinking Water
NP = Non Potable (includes wastewater, surface water, etc.)
HW = Hazardous Waste

02. Sample lists typical bottle provided by Ana-Lab.

03. The minimum volume does not allow for re-runs or QC specific (Duplicate, MS, MSD) analysis.

04. Three glass quarts (amber for organics) are required for MS/MSD analysis.

05. Three vials are required for MS/MSD analysis.

06. Bottle obtained from subcontractor.

07. 100g required for TCLP metals only. Complete TCLP may require up to 1500g.

08. Soil Samples require a 5035 Kit in most cases.

Preservatives

C₆H₈O₆ – Ascorbic Acid
EDA – Ethylenediamine
EDTA – N,N’-1,2-Ethane dilybis-(N-(carboxymethyl)glycine)
HCl – Hydrochloric Acid
HNO₃ – Nitric Acid
H₂SO₄​ – Sulfuric Acid
Na₂S₂O₃​ – Sodium Thiosulfate
Na₂SO₃ – Sodium Sulfite
NaHSO₄ – Sodium Bisulfate
NaOH – Sodium Hydroxide
NH₄Cl – Ammonium Chloride
ZnC₄H₆O₄ – Zinc Acetate

Gross Alpha

Gross Alpha

Matrix: DW/NP 
NP Method: SM 7110 B / EPA 900

Sample Requirements

Bottle

Polyethylene 500 mL (2)

Min. Volume (mL)3:

1000

Preservation:

HNO3 to pH <2, Cool to < 6°C

Holding Time:

180 Days

Notes

01. Abbreviations
DW = Drinking Water
NP = Non Potable (includes wastewater, surface water, etc.)
HW = Hazardous Waste

02. Sample lists typical bottle provided by Ana-Lab.

03. The minimum volume does not allow for re-runs or QC specific (Duplicate, MS, MSD) analysis.

04. Three glass quarts (amber for organics) are required for MS/MSD analysis.

05. Three vials are required for MS/MSD analysis.

06. Bottle obtained from subcontractor.

07. 100g required for TCLP metals only. Complete TCLP may require up to 1500g.

08. Soil Samples require a 5035 Kit in most cases.

Preservatives

C₆H₈O₆ – Ascorbic Acid
EDA – Ethylenediamine
EDTA – N,N’-1,2-Ethane dilybis-(N-(carboxymethyl)glycine)
HCl – Hydrochloric Acid
HNO₃ – Nitric Acid
H₂SO₄​ – Sulfuric Acid
Na₂S₂O₃​ – Sodium Thiosulfate
Na₂SO₃ – Sodium Sulfite
NaHSO₄ – Sodium Bisulfate
NaOH – Sodium Hydroxide
NH₄Cl – Ammonium Chloride
ZnC₄H₆O₄ – Zinc Acetate

PCBs/Pesticides

PCBs/Pesticides

Matrix: DW 
NP Method: EPA 508

Sample Requirements

Bottle

Amber Glass Qt4 with Teflon lined lid

Min. Volume (mL)3:

1000

Preservation:

80 mg Na2S2O3, Cool to < 6°C

Holding Time:

7 Days

Notes

01. Abbreviations
DW = Drinking Water
NP = Non Potable (includes wastewater, surface water, etc.)
HW = Hazardous Waste

02. Sample lists typical bottle provided by Ana-Lab.

03. The minimum volume does not allow for re-runs or QC specific (Duplicate, MS, MSD) analysis.

04. Three glass quarts (amber for organics) are required for MS/MSD analysis.

05. Three vials are required for MS/MSD analysis.

06. Bottle obtained from subcontractor.

07. 100g required for TCLP metals only. Complete TCLP may require up to 1500g.

08. Soil Samples require a 5035 Kit in most cases.

Preservatives

C₆H₈O₆ – Ascorbic Acid
EDA – Ethylenediamine
EDTA – N,N’-1,2-Ethane dilybis-(N-(carboxymethyl)glycine)
HCl – Hydrochloric Acid
HNO₃ – Nitric Acid
H₂SO₄​ – Sulfuric Acid
Na₂S₂O₃​ – Sodium Thiosulfate
Na₂SO₃ – Sodium Sulfite
NaHSO₄ – Sodium Bisulfate
NaOH – Sodium Hydroxide
NH₄Cl – Ammonium Chloride
ZnC₄H₆O₄ – Zinc Acetate

PCBs

PCBs

Matrix: DW 
NP Method: EPA 505

Sample Requirements

Bottle

Glass Vial 40 mL (ZHE)5

Min. Volume (mL)3:

40

Preservation:

100 mg Na2S2O3, Cool to <6°C

Holding Time:

14 Days

Notes

01. Abbreviations
DW = Drinking Water
NP = Non Potable (includes wastewater, surface water, etc.)
HW = Hazardous Waste

02. Sample lists typical bottle provided by Ana-Lab.

03. The minimum volume does not allow for re-runs or QC specific (Duplicate, MS, MSD) analysis.

04. Three glass quarts (amber for organics) are required for MS/MSD analysis.

05. Three vials are required for MS/MSD analysis.

06. Bottle obtained from subcontractor.

07. 100g required for TCLP metals only. Complete TCLP may require up to 1500g.

08. Soil Samples require a 5035 Kit in most cases.

Preservatives

C₆H₈O₆ – Ascorbic Acid
EDA – Ethylenediamine
EDTA – N,N’-1,2-Ethane dilybis-(N-(carboxymethyl)glycine)
HCl – Hydrochloric Acid
HNO₃ – Nitric Acid
H₂SO₄​ – Sulfuric Acid
Na₂S₂O₃​ – Sodium Thiosulfate
Na₂SO₃ – Sodium Sulfite
NaHSO₄ – Sodium Bisulfate
NaOH – Sodium Hydroxide
NH₄Cl – Ammonium Chloride
ZnC₄H₆O₄ – Zinc Acetate

Endothall

Endothall

Matrix: DW 
NP Method: EPA 548.1

Sample Requirements

Bottle

Glass Vial 40 mL (ZHE)5

Min. Volume (mL)3:

40

Preservation:

Na2S2O3 (0.008%), Cool to < 6°C

Holding Time:

14 Days

Notes

01. Abbreviations
DW = Drinking Water
NP = Non Potable (includes wastewater, surface water, etc.)
HW = Hazardous Waste

02. Sample lists typical bottle provided by Ana-Lab.

03. The minimum volume does not allow for re-runs or QC specific (Duplicate, MS, MSD) analysis.

04. Three glass quarts (amber for organics) are required for MS/MSD analysis.

05. Three vials are required for MS/MSD analysis.

06. Bottle obtained from subcontractor.

07. 100g required for TCLP metals only. Complete TCLP may require up to 1500g.

08. Soil Samples require a 5035 Kit in most cases.

Preservatives

C₆H₈O₆ – Ascorbic Acid
EDA – Ethylenediamine
EDTA – N,N’-1,2-Ethane dilybis-(N-(carboxymethyl)glycine)
HCl – Hydrochloric Acid
HNO₃ – Nitric Acid
H₂SO₄​ – Sulfuric Acid
Na₂S₂O₃​ – Sodium Thiosulfate
Na₂SO₃ – Sodium Sulfite
NaHSO₄ – Sodium Bisulfate
NaOH – Sodium Hydroxide
NH₄Cl – Ammonium Chloride
ZnC₄H₆O₄ – Zinc Acetate

Dioxins/Furans

Dioxins/Furans

Matrix: DW 
NP Method: EPA 1613

Sample Requirements

Bottle

Amber Glass Qt4 with Teflon lined lid

Min. Volume (mL)3:

1000

Preservation:

Cool to < 6°C

Holding Time:

Notes

01. Abbreviations
DW = Drinking Water
NP = Non Potable (includes wastewater, surface water, etc.)
HW = Hazardous Waste

02. Sample lists typical bottle provided by Ana-Lab.

03. The minimum volume does not allow for re-runs or QC specific (Duplicate, MS, MSD) analysis.

04. Three glass quarts (amber for organics) are required for MS/MSD analysis.

05. Three vials are required for MS/MSD analysis.

06. Bottle obtained from subcontractor.

07. 100g required for TCLP metals only. Complete TCLP may require up to 1500g.

08. Soil Samples require a 5035 Kit in most cases.

Preservatives

C₆H₈O₆ – Ascorbic Acid
EDA – Ethylenediamine
EDTA – N,N’-1,2-Ethane dilybis-(N-(carboxymethyl)glycine)
HCl – Hydrochloric Acid
HNO₃ – Nitric Acid
H₂SO₄​ – Sulfuric Acid
Na₂S₂O₃​ – Sodium Thiosulfate
Na₂SO₃ – Sodium Sulfite
NaHSO₄ – Sodium Bisulfate
NaOH – Sodium Hydroxide
NH₄Cl – Ammonium Chloride
ZnC₄H₆O₄ – Zinc Acetate

Diquat/Paraquat

Diquat/Paraquat

Matrix: DW 
NP Method: EPA 549.1

Sample Requirements

Bottle

500 mL HD Amber PVC

Min. Volume (mL)3:

500

Preservation:

100 mg Na2S2O3, Cool to <6°C

Holding Time:

7 Days

Notes

01. Abbreviations
DW = Drinking Water
NP = Non Potable (includes wastewater, surface water, etc.)
HW = Hazardous Waste

02. Sample lists typical bottle provided by Ana-Lab.

03. The minimum volume does not allow for re-runs or QC specific (Duplicate, MS, MSD) analysis.

04. Three glass quarts (amber for organics) are required for MS/MSD analysis.

05. Three vials are required for MS/MSD analysis.

06. Bottle obtained from subcontractor.

07. 100g required for TCLP metals only. Complete TCLP may require up to 1500g.

08. Soil Samples require a 5035 Kit in most cases.

Preservatives

C₆H₈O₆ – Ascorbic Acid
EDA – Ethylenediamine
EDTA – N,N’-1,2-Ethane dilybis-(N-(carboxymethyl)glycine)
HCl – Hydrochloric Acid
HNO₃ – Nitric Acid
H₂SO₄​ – Sulfuric Acid
Na₂S₂O₃​ – Sodium Thiosulfate
Na₂SO₃ – Sodium Sulfite
NaHSO₄ – Sodium Bisulfate
NaOH – Sodium Hydroxide
NH₄Cl – Ammonium Chloride
ZnC₄H₆O₄ – Zinc Acetate